90037350rev01
- 8 -
• Carefully read the directions given in this manual; they contain
important information on safety during installation, operation
and maintenance.
Keep this manual in a safe place for future consultation!
• The oven must be installed, commissioned and maintained
only by an authorized service agent.
• The overall power supply impedance of the equipment must
be less than 100 Ohm
This appliance must be put only to the use for which it is
specifically intended, i.e. cooking foods; any other type of use
is improper and therefore dangerous.
• Use suitable lifting systems or accessories when handling the
equipment or packaging.
• Having removed the packing check that the appliance is not
damaged in any way.
If in doubt, proceed no further with installation of the appliance
and contact the Customer Service or your dealer immediately.
• Packing materials are potentially dangerous and must not be
left where children can play with them.
• Packing materials must be disposed of in conformity with local
regulations. This normally means that the different materials
are sorted according to type and collected as urban refuse.
• Before positioning and connecting the appliance, check that
the utilities (electrical power, water and gas supplies) are as
indicated on the data plate.
The data plate is on the right-hand side, at the bottom.
• The positions of the inlet and drain connections are clearly
labelled. For further details, see the installation diagram
attached to this manual.
• During installation and/or maintenance work it is
recommended you wear gloves to protect your hands.
1 • GENERAL WARNINGS
To Next Page
Loading...
