Lainox Naboo Series Installation And Maintenance Manual

38
90027911rev04
13 • OPERATING AT THE RATED HEAT OUTPUT
Check the combustion, CO (ppm) and CO2
(%) values, with an appropriate instrument.
Start the oven working, with the door open,
and wait for approximately 5 minutes.
Position the flue gas collection probe in the
flue gas outlet pipe (chamber and boiler).
The CO
2 must be for:
Natural gas between 9% and 10.5%
L.P.G. between 9% and 13%
The CO must be no greater than 300 ppm
(measured).
If these readings are outside the ranges,
proceed as stated in the technical manual.
For the conversion from natural gas to LPG,
or vice versa, proceed as described in the
technical manual.
- Boiler Burner
Repeat these operations, setting 130°C steam
cooking (also with door closed).
Conversion: As mentioned above, every appliance is factory set to burn the type of gas
specified, it may become necessary nonetheless to convert the appliance from one type of gas
to another. Therefore, only personnel authorized by the company and belonging to the technical
service who have the corresponding technical handbook can do this work.

Lainox Naboo Series Specifications

General

Model	Naboo Series
Category	Oven
Type	Combi Oven
Control	Touchscreen
Manufacturer	Lainox
Control Panel	Touch screen
Connectivity	Wi-Fi
Capacity	Varies by model
Cooking Modes	Convection, Steam
Power Supply	Electric
Programming	Recipe storage
Cleaning System	Automatic Cleaning System
Capacity Details	Varies by model size
Power Consumption	Varies by model
Temperature Range	30°C - 300°C
Dimensions	Varies by model
Weight	Varies by model
Programs	Pre-set cooking programs available
Ventilation	Built-in