24
SOLID CLEAN DETERGENT CREATION PROCEDURE
Select the desired wash. If there is not enough
detergent available for the wash, a popup
appears requiring the Solid Clean detergent
creation procedure.
Open the drawer and remove the cap from the
SOLID CLEAN drawer.
Unscrew the cap from the Solid Clean jar and
screw it onto the drawer.
Press OK.
13 • CREATION OF SOLID CLEAN DETERGENT
Along with the wash selection, if there is insufficient detergent for running the selected wash, the
Solid Clean detergent creation procedure is required.
To Next Page
Loading...
