27
SOLID CAL DESCALER CREATION PROCEDURE
Select CALOUT or the WASH+CALOUT
desired. If there is insufficient descaler to run
the wash, a popup appears requiring the Solid
Cal descaler generation procedure.
Open the drawer and remove the cap from the
SOLID CAL drawer.
Unscrew the cap from the Solid CAL descaler
jar and screw it onto the drawer.
Press OK.
14 • CREATION SOLID CAL DESCALER
Along with the CALOUT procedure, if there is insufficient descaler for running the selected
CALOUT, the Solid Cal descaler creation procedure is required.
To Next Page
Loading...
