_17
Troubleshooting
Product or pans emit metal noises while heating and cooling.
• When the metal parts are heated, they may expand and cause noise.
>>> This is not a fault.
Product makes clicking noise when operating.
• This is the electronic controls working.
>>> This is not a fault.
Product does not operate.
• The mains fuse is defective or has tripped.
>>> Check fuses in the fuse box. If necessary, replace or reset them.
• Hob appears to be locked or not responding properly to the controls
>>> Power off the appliance at the switched outlet or circuit breaker.
Wait 20 seconds and then reconnect it.
If this does not cure the problem please call the Service Line.
User manual LAM1749
To Next Page
Loading...
