4 Transport and storage
Issue EN 2022/05 PUK 6 Operating manual
4 Transport and storage
4.1 Transport
In principle, the welder can be carried and transported by hand without any
special precautions. For longer transport distances, however, we expressly
recommend packing the device in the original box or a similar suitable con-
tainer. To avoid scratches or damage to the surface, it is also advisable to
line transport containers with soft, dry and scratch-free materials (e.g.
foam).
4.2 Storage
For longer storage, disconnect the mains plug and cut off the gas supply.
The storage location of the device must be dry and dust-free and must not
be subject to extreme temperatures (colder than -20 °C or hotter than +55
°C).
To Next Page
