Using the Rotisserie Burner (4 & 5 Burner Models Only)
Match Lighting
Note: Match lighting tool is located on the inside of the
door.
1.
Turn all gas control knobs to the OFF position.
2. Turn on gas valve from gas source.
3. Lid MUST be open when lighting.
5.
Remove the match lighting tool and stick a match
into the end of the tool.
6.
Light the match.
7.
Once lit, guide the lit match under the grate.
8.
Push in and turn the control knob to HI
for the
burner closest to the light match. The burner should
light immediately.
9.
Adjust burner control knob to the desired cooking
temperature.
4. Remove warming rack..
26
To Next Page
Loading...
