Manual radarTOUCH Version 3.4
T. Schwirten LANG AG
14.10.10
Page 25
5.3 How to ping the radarTOUCH
If you want to know if the connection between your computer and the radarTOUCH works
you can ping the measurement device:
» Go to the windows Start button and click on “run”
» If you have Windows 7 there is no run button, in this case go on with the next step:
» Type cmd and approve with enter
» Now the following window should appear:
» Type “ping” and the IP you want to ping with a space between and approve with enter
» The default IP address of the radarTOUCH is 192.168.60.3
» Now this IP will be pinged four times and if the ethernet connection is available there
will be a response like it is shown in the following picture:
To Next Page
Loading...
Need help?
General