7: Services
SLC™ 8000 Advanced Console Manager User Guide 135
2. To save, click the Apply button.
Date and Time Commands
Go to Date and Time Commands (on page 364) to view CLI commands which correspond to the
web page entries described above.
Web Server
The Web Server supports all versions of the TLS protocol, but due to security concerns, does not
support any versions of the SSL protocol. The Web Server page allows the system administrator
to:
Configure attributes of the web server.
View and terminate current web sessions.
Import a site-specific SSL certificate.
To configure the Web Server:
1. Click the Services tab and select the Web Server option. The following page appears:
Synchronize via Select one of the following:
Broadcast from NTP Server: Enables the SLC unit to accept time
information periodically transmitted by the NTP server. This is the default if
you enable NTP.
Poll NTP Server: Enables the SLC 8000 advanced console manager to query
the NTP Server for the correct time. If you select this option, complete one of
the following:
Local: Select this option if the NTP servers are on a local network, and
enter the IPv4 or IPv6 address of up to three NTP servers. This is the
default, and it is highly recommended.
Public: Select this option if you want to use a public NTP server, and select
the address of the NTP server from the drop-down list. This is not
recommended because of the high load on many public NTP servers. All
servers in the drop-down list are stratum-2 servers. (See www.ntp.org
for
more information.) Each public NTP server has its own usage rules --please
refer to the appropriate web site before using one. Our listing them here is
to provide easy configuration but does not indicate any permission for use.
To Next Page
Loading...
Need help?
General
