Lantronix SLC 8048 User Manual

9: Device Ports
SLC™ 8000 Advanced Console Manager User Guide 218
print("Timeout waiting to login.")
p.terminate(True)
sys.exit(1)
elif i == 1: # EOF
print("Session unexpectedly terminated.")
p.terminate(True)
sys.exit(1)
elif i == 2: # SLC8000 model number
model = p.match.group(1)
numPorts = int(model)
elif i == 3: # SLB882 model number
numPorts = 8
elif i == 4: # prompt
loggedIn = True
slcPrompt = p.match.group(1).decode('utf-8')
if numPorts == 0:
print("Cannot determine number of device ports.")
p.terminate(True)
sys.exit(1)
print("Number of device ports:", numPorts)
# Terminate the CLI session
p.sendline("logout")
time.sleep(.500)
p.wait()
skipPorts = False
devicePort = 1
pList = []
if numPorts == 24 or numPorts == 40:
# Adjust port numbering for SLC8024 and SLC8040
skipPorts = True
numPorts = numPorts + 8
# Loop through device ports, connect and try to detect the prompt
while devicePort <= numPorts:
if skipPorts and devicePort >= 9 and devicePort <= 16:
devicePort = devicePort + 1
pList.append('')
continue
print("Scanning device port", devicePort, "...")
port = str(devicePort)
p=pexpect.spawn('portsession', ['-p', port])
# Login (if required), and wait for the first prompt
p.sendline("")
gotPrompt = False
slcDevice = False
cnt = 1
while not gotPrompt:
i = p.expect([pexpect.TIMEOUT, pexpect.EOF,

Lantronix SLC 8048 Specifications

General

Brand	Lantronix
Model	SLC 8048
Category	Switch
Language	English