EasyManuals Logo

LaserLine EPS4016 User Manual

Default Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Pag.2
Per autovetture predisposte con ruota di
scorta esterna e/o gancio di traino si consiglia
di consultare il manuale di istruzione per
impostare la funzione n.49.
For vehicles with external spare wheel and/or
tow bar refer to the instructions manual
(parameter setting n. ).49
Fare attenzione all’eventuale presenza del
longherone in ferro dietro al paraurti. Non fare
appoggiare la parte posteriore del sensore al
ferro.
Pay attention in of an iron strengtheningcase
bar behind the bumper of the vehicle. Make
sure that the back of the sensor does not
touch the iron bar.
Onde evitare false segnalazioni, per
l’installazione su paraurti in èmetallo
obbligatorio utilizzare adattatori optional.
To avoid false detections, for the installation on
a bumper it’s to use themetal mandatory
special optional gasket.
Metallo
Metal
!
Nel caso venisse collegato un rimorchio e/o
gancio di traino è possibile escludere la loro
rilevazione fornendo un segnale di massa al
pin n.6 del connettore collegato alla centralina.
Filo BLU/GIALLO.
In case a trailer and/or tow bar is connected, it
is possible to exclude their detection by
providing a ground signal to pin n. of the6
connector plugged into the unit.
BLUE/YELLOW wire
!
!
ACCESSORIO OPTIONAL
I sistemi di parcheggio possono essere
completati con gli accessori Display o Speaker
esterno dove mancante.
OPTIONAL ACCESSORY
Parking systems can be upgraded with
accessories Display or external Speaker,
where missing.
!
AVVERTENZE PER L’INSTALLAZIONE / INSTALLATION NOTE

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LaserLine EPS4016 and is the answer not in the manual?

LaserLine EPS4016 Specifications

Power IconPower
supply voltage10.8 - 3 V, 9 - 30 V
current consumption with active sensor20 mA max
Operating Environment IconOperating Environment
range of service temperatures-30/+0°C, -25/+70°C
frequency of ultrasound40 KHz