9
Generally
- This machine is allowed to be operated only by attendants who are over 18 yrs
old, physically and mentally capable and demonstrably instructed with its
operation.
- One of two attendants at least (a tractor driver) should have a respective
driver's license, group "T".
- This machine can be operated by two persons only.
- Training courses for the operating staff should include also practical operation
under supervision of an experienced person or your dealer and with
explanation of necessary work safety instructions.
- Before working learn all functions of individual controls and safety elements
and carry out functional checks before any use. Check especially loading of
materials, functionality and height of the controller frame.
- By pushing the concerned controller in direction of material input the machine
should stop material loading immediately. Any repeated putting machine into
operation is possible only after bringing the frame in its initial position and
pushing the green button on the chute. The controller frame has to be
advanced in front of the hinged loading chute edge so that the attendant
stops the loading rolls at pushing the frame by hand (or leg or belly).
- It is strictly forbidden to change or to set the controller frame so that the STOP
position is hidden under the loading chute edge, see fig.
- To stop loading it is also possible to press the STOP button under the loading
chute.For deactivation turn the STOP button slightly and pull it up. Any other
repeated putting machine into operation is analogical, i.e. after bringing the
frame in its initial position and pushing the green button on the chute.
To Next Page
Loading...