Starting up
10.08.99
YACE0060
21
6.4 Menu functions
−
Switching from setpoint selection (level 0) to level 1 using
the key
or
−
Within one level it is possible to scroll using the keys.
−
In principle
, after each setting has been made it is entered
automatically after approx. 4 s or
−
Settings are entered immediately on operating this key
6.4.1 Refrigeration system
(level 1)
−
The display shows the current bath temperature, COOL and
the set operating mode. To alter the setting, press the key
on the left.
−
The display flashes (approx. 4 s). During this time start to
set the operating mode with one of the keys.
or
0 = Refrigeration system OFF
1 = Refrigeration system ON 100 % capacity
2 = Refrigeration ON, 50% capacity (only RE 207, 212,
220, 307, 312, 320)
A = automatic operation (
➾
Section 3.6.)
−
Forward with key to "pump output" or
−
with key back to level 0 (setpoint input).
To Next Page
Loading...
Need help?
General
