Lauda Ecoline RE 207 - Pump Output

Startin
g
u
p
22
☞
−
The refrigeration system can normally work with automatic operation = A.
The refrigeration system switches on or off depending on the temperature and
operation status.
−
In special cases the cooling machine can be switched off
!
”0” or adjusted at
permanent running
!
”I”.
6.4.2 Pump output
and
1x
−
For setting the pump output from level 0 press the key
combination shown on the left, or
−
move forward from COOL function with this key
−
The display shows the current bath temperature, PUMP and
the current output step. To alter the setting press the key
shown on the left.
−
Display flashes (approx. 4 s).
or
−
During this time start to set the required step with one of the
keys.
0 = pump stopped, heating off
1 = low pump output
2 , 3 , 4 = medium pump output
5 = maximum pump output
−
The pump responds immediately (can be heard). (Setting is
entered after approx. 4 s
➾
Section 6.4.)
−
Move forward with key to "Selecting the setpoint resolution"
or
−
back with the key to "COOL - function" (RE 3xx) or to
"Setpoint selection" (RE 2xx).