LAUNCH X-431 GDS User’s Manual
Figure 2-6
2.3 First operation
2.3.1 Turn on
Press the [Power Switch] butt
on
on the main u
nit, the system will
begin to initialize, as shown in
Figure 2-6.
Note: Hold and press the [Power Switch] button for 6~8 seconds to turn off
the main unit, but this i
s not recommended, please click [Exit system]
icon on the main menu to turn off the device.
Figure 2-7
After the system completes
initializing, the main menu
shown
as Figure 2-7 will appear on the
screen. Here you can select a
certain function and operate it.
Figure 2-8
2.3.2 Icons and function items
There are three icons on the top
right corner of main menu, as
shown in Figure 2-8.
Signal indicator: Indicate① s
current signal
and its strength.
② Power indicator: Indicates the power capacity / power charging status /
connection to o
uter power supply.
③ Time: Display current local time.
9
To Next Page
Loading...