CA： Cranking Amps standard, effective starting current value at 0°C
MCA: Marine Cranking Amps standard, effective starting current value at 0°C.
JIS：Japan Industrial Standard, displayed on the battery as combination of the numbers
and letters, e.g. 55D23,80D26.
DIN： German Auto Industry Committee Standard
IEC： Internal Electro technical Commission Standard
EN： European Automobile Industry Association Standard
GB：China National Standard
Input correct test standard and rating, press OK key, tester starts to test, and
dynamic interface "TESTING" prompted. See below:
It takes around 3 seconds to display the battery test result.
3.4 Cranking Test
Tester prompts as following:
Starting the engine as prompted, tester will automatically complete the cranking
test and display the result.
To Next Page
Loading...
