Launch BST-560 - Chapter 3 Operation Guide; 3.1 Pre-Test Procedures

LAUNCH BST-560 User Manual for Battery Tester
5
Chapter 3 Operation
3.1 Pre-Test
3.1.1 Connect Tester
Connect the red test clamp with battery anode and the black one with cathode,
the tester will power on automatically. Voltage battery below 7.0VDC can’t be
tested properly, then press OK key to continue.
According to the tester, you can press UP/DOWN key to choose:
① battery test
② starting system test
③ charging system test
④ battery test result
⑤ print test result
⑥ select language
3.1.2 Key Description
● Up and Down keys
Select upwards or downwards via UP and DOWN keys.
● Return key
Return to previous menu via RETURN key. 按
● Ok key
Confirm the selection via OK key
Key Photo