Launch CRP123 - 6.3 Beeper; 6.4 Record Mode

26
LAUNCH Creader Professional CRP123 User's Manual
Choose [Unit of Measure] and press [ ] to conrm, the screen will enter the
unit setting interface. Use the [
]/[ ] button to choose the desired one
and press [
] to save your change.
Figure 6-3
6.3 Beeper
It is used to set On/Off the buzzer.
Choose [Beeper] and press [
] to conrm, the screen enters Fig. 6-4. Press
[
] to switch between on and off.
Figure 6-4
6.4 Record Mode
It is used to turn On/Off recording function.