8.3 Fill in Product Information
Figure 8-5
Choose the desired product type from the pull-down list. The serial No. and
register password can be found from the [Tool Information] in “Help” (See
Chapter 7. Help). Dealer code can be obtained from dealer.
After the information is lled, click “Submit” to register your product.
Note: If the lled serial No. or registration No. is invalid, the screen will display a
wrong message. Click “OK” button to return to the previous interface to re-ll the
correct numbers.
8.4 Software Download
Note: Only the registered user can download and update the software.
Click [Download center] to enter download center page after logging in
successfully.
Note: If there is not the latest version in the download center or the latest version
can not meet the needs of the users as they are released by other companies,
users could buy the version in the purchase center or in the update center (see
“Purchase Software”). In the purchase center, users can buy the software that
doesn’t install in the download center. After purchase successfully, the purchased
software will be added to the download center list automatically.
It’s better for users to create a new folder named “Creader Pro update”, to
include all the downloaded software according to the following procedures.
To Next Page
Loading...
Need help?
General
