LAUNCH CRT 501 Series User Manual
11
LANs. Choose the desired WLAN access point / network,
• If the network you chose is open, you can connect directly.
• If the selected network is encrypted, you have to enter the right security
key (network password).
Note: If you choose Ignore in WLAN setup, it will go into the date setting
page. If the tool has been properly connected to the Internet, the system will
automatically obtain the correct network date and time and navigate to step 5.
5. After the network connection is done, tap Next Step to congure workshop
information. Input the required information, and tap Next Step to go to next
step.
Note: After you congured it, the system will append it on the report every
time a report is successfully generated.
6. Carefully read all terms and conditions of the user agreement, check the
box before the Agree to all the above terms, and tap OK to nish the
sign-up process and navigate to Job Menu.
4.2 Job Menu
The main menu screen includes the following function modules:
To Next Page
Loading...
