Launch X-431 V+ User Manual

LAUNCH X-431 V+ V4.0 User Manual
26
If the VCI was once used with other devices, you need to cancel the pairing of the VCI
first via either one of the following ways:
• On the Android’s home screen, tap
Settings
->
Bluetooth
-> Choose the desired
VCI from the Paired list. Tap , and then tap
FORGET
to unpair it.
• Tap
User Info
->
VCI Management
-> Tap
Deactivate matching
.
Tap
Scan
to start searching for the VCI and pairing up with it.
2. Once pairing is complete, the handset starts reading the vehicle VIN.
A. If the VIN can be found from the remote server database, the following
screen will appear:
• Tap
Diagnostic
to start a new diagnostic session.
• To perform other functions, tap
Quick access
to directly go to the diagnostic

Launch X-431 V+ Specifications

General

Screen Resolution	1280 x 800 pixels
Connectivity	Wi-Fi, Bluetooth
Operating System	Android
Display	Touchscreen
Battery	7000 mAh
Camera	5MP
Supported Protocols	OBD II, EOBD, CAN, etc.
Languages	Multiple languages