Launch X-431Diagun

LAUNCH X-431Diagun User's Manual
33
Connect the second car by wire
connection and then double click "Wire
Diagnosis" on the desktop.
The maker screen will appear on the
screen, as shown on the left.
Select as the procedure order as
reading the datastream of the first car.
(for details to see 3.5.1)
Note:
z Do select a car with the same
maker or version.
z The "Vehicle_2" in the taskbar
mesns to diagnose the second car
by wire connection.
The dynamic data of the second car
datastream item will appear on the
screen, as shown on the left.