LAUNCH X-431Diagun User's Manual
46
1) A computer that can access the internet.
2) A TF card reader of X-431Diagun and a TF card to be updated.
Necessary software:
Tested model software and update tool (download from www.x431.com)
Connection
1
2
3
4
5
6
7
Steps:
a) Eject the TF card from the X-431Diagun main unit (press the TF card
slightly and it will pop up automatically, as shown in Figure 1 and
Figure 2);
b) Insert the TF card into the card reader (as shown in Figure 3, the side
printed with words is upward, and insert the TF card into the card
reader perpendicularly, as shown in Figure 4, Figure 5 and Figure 6);
c) Connect the card reader to the USB port of the computer.
TF Card Reader Drive Program Installation
You don't need to install the drive program if the operating system of your
computer is Windows Me/2000/XP, Mac OS 9.x/Mac OS X or Linux 2.4.x,
but if the operating system is Windows98, you must install the drive program.
You can download the installation software from www.x431.com
and install it
according to the Installation Wizard.
To Next Page
Loading...
Need help?
General
