LAUNCH X-431Diagun User's Manual
52
Answer: There are two possible causes:
1. Your TF card is damaged.
2. You’ve changed language and the data is related to language. You may
find the data after switching back to the former language.
Question: The screen does not respond or responds wrongly when I click it
with stylus. What should I do?
Answer: It is necessary to calibrate the screen. Please refer to the section
2.5.2 in User’s Manual.
Question: What can I do when the screen is confused?
Answer: Please quit the current application (interface), and run it again. If
the problem still exists, please restart the system.
About System Setting
Question: The screen is inactive after the cross cursor appears on the
screen. Why?
Answer: The system is calibrating the touch screen. The machine will work
after the screen is calibrated. Refer to the section 2.5.2 in User’s Manual.
Question: The screen does not respond or responds wrongly when I click it
with stylus. What should I do?
Answer: It is necessary to calibrate the screen. Please refer to the section
2.5.2 in User’s Manual.
Question: The time displayed in the bottom right-hand corner of the screen
is incorrect. How to adjust it?
Answer: It is because the time was set incorrectly. Please refer to the
To Next Page
Loading...
Need help?
General
