LAVAZZA LB 2801 - MALFUNCTIONS and RELATIVE SOLUTIONS

ENGLISH
76
9. MALFUNCTIONS and RELATIVE SOLUTIONS
PROBLEM
CAUSE SOLUTION
MACHINE LACKING
POWER
1) The machine switch is in the “0” position
2) Machine just started and not yet up to pressure
3) Malfunction of electrical system or hydraulic
system
1) Place the machine switch in the “1” position
2) Wait for the machine to warm up
3) Contact technical service
NO DISPENSING The machine switch is in the “0” position Place the machine switch in the “1” position
WATER LEAKS FROM THE
MACHINE
The drain tube is broken or detached or has
an obstruction in the water flow
Check and restore the connection of the
drain tube to the tub
COFFEE IS TOO COLD
1) Machine just started and not yet up to pressure
2) Malfunction of electrical system or hydraulic
system
1) Wait for the machine to warm up
2) Contact technical service
COFFEE IS TOO HOT
Malfunction of electrical system or hydraulic
system
Contact technical service
THE PRESSURE
GAUGE INDICATES AN
UNACCEPTABLE PRESSURE
Malfunction of electrical system or hydraulic
system
Contact technical service
GROUNDS IN CUP The lower perforator is broken. Replace the lower perforator
FLASHING OF STOP/
PROG LED ON KEYPAD
No water
1) Open all taps before the machine
2) Check that there is actually water in the
mains
Malfunction of electrical system or hydraulic
system
Contact technical service
If the problem cannot be resolved, unplug the machine and contact technical service.
Do not attempt any sort of repairs.