LAVAZZA LB GUZZINI - Page 11

M
aintenance manual for technical assistance - LB GUZZINI
Manual code 10083088 / Rel. 0.00 / January 2008
8
- Remove the faston by levering with a screwdriver on
the retaining spring.
- Lever with a screwdriver on the indicated points then
press and pull outwards the connector (8) to remove it.
- Remove the pipe (9) and (10).
- Turn again upside down and unscrew the four screws
(11) using a screwdriver TORX T10 in order to extract
the conveyor cover (12).
8
13
9
10
11
1
1
11
11
Attention
In case of replacement of the conveyor cover (12)
you should order and apply the safety label (13).
12
12