LawnMaster VBRM16 - User Manual

Other manuals for LawnMaster VBRM16

Original Instructions184 pages

Questions and Answers

A
Alejandro JenkinsAug 23, 2025
Why is my LawnMaster VBRM16 not starting?
- R
  Raymond JonesAug 25, 2025
  Your LawnMaster Lawn Mower might fail to start due to several reasons: * The isolator key might not be correctly installed; ensure it's properly installed. * The battery might not be correctly installed; make sure the battery is correctly installed. * The battery might not be fully charged; charge the battery. * There might be clogging; remove the isolator key and battery, then check underneath the mower and clear any obstructions (always wear gardening gloves).
R
Richard CrawfordSep 1, 2025
Why is there no charging procedure possible for LawnMaster VBRM16 Lawn Mower?
- T
  tsanfordSep 1, 2025
  If no charging procedure is possible for your LawnMaster Lawn Mower, it might be due to: * Contaminated battery contacts: Clean the battery contacts by inserting and removing the battery several times, or replace the battery. * Defective socket outlet, fuse, mains cable, or battery charger. * Faulty battery: Replace the battery.
T
tracyjohnsonSep 1, 2025
What to do if all lights flash red during software update of LawnMaster Lawn Mower?
- G
  Grace DavisSep 2, 2025
  If all lights flash red during a software update on your LawnMaster Lawn Mower, it indicates that the software update has failed. Ensure the software file is correctly named, the USB stick contains only the software file and is otherwise blank, and the software is not contained in a folder.
R
Robin FergusonSep 2, 2025
Why LawnMaster VBRM16 Lawn Mower runs outside working area?
- A
  Amber GilbertSep 2, 2025
  If your LawnMaster Lawn Mower is running outside the designated working area, there are a few potential causes. First, check the border barriers to ensure they are correctly set to define the mowing area, and make any necessary improvements or temporary barriers. Also, make sure the ultrasonic sensors are turned on. Finally, if the working area is steeper than 35%, delimit that area.
M
mjohnsonSep 3, 2025
Why is my LawnMaster VBRM16 Lawn Mower vibrating?
- F
  fphillipsSep 3, 2025
  If your LawnMaster Lawn Mower is vibrating, it could be due to several reasons. Check if the cutting blades are damaged and need replacement. Also, ensure that only one blade is fitted at each screw and that blades are not stuck. Verify that the blades are of the same version and thickness. Finally, tighten the blade screws if they are loose.
B
Brenda Campbell MDSep 4, 2025
What does a yellow continuous error indicator mean on a LawnMaster Lawn Mower?
- C
  camposwilliamSep 4, 2025
  A yellow continuous error indicator on your LawnMaster Lawn Mower can mean one of two things. It could indicate that the lift sensor has been activated for 10 seconds, in which case you should remove and re-insert the isolator key, check for obstacles taller than 10 cm, remove them, and restart the mower. Alternatively, it could mean the obstruction sensor has tripped 10 times within one minute; in that case, remove and re-insert the isolator key, remove any obstacles, and if the grass is too tall, mow it to below 60 mm with a conventional lawn mower before restarting.
A
aaron45Sep 5, 2025
What causes no charging procedure possible for LawnMaster VBRM16 Lawn Mower?
- A
  Ashley Mitchell MDSep 5, 2025
  If no charging procedure is possible for your LawnMaster Lawn Mower, the battery contacts may be contaminated. Try cleaning them by inserting and removing the battery several times, or replace the battery. Also, check the socket outlet, fuse, mains cable, and battery charger for defects. If necessary, contact the After Sales Helpline. Finally, the battery itself may have a fault and need replacement.
K
Kyle CarpenterSep 5, 2025
What to do if charge control LEDs do not light up on LawnMaster Lawn Mower?
- K
  Kevin AdamsSep 5, 2025
  If the charge control LEDs do not light up after inserting the mains plug into the socket for your LawnMaster Lawn Mower, ensure the mains plug of the battery charger is fully inserted into the socket outlet. If the issue persists, check the socket outlet, mains cable, or battery charger for defects. If necessary, contact the After Sales Helpline.
R
Robert RobertsSep 6, 2025
Why LawnMaster robotic lawn mower runs outside working area?
- M
  Michael SalazarSep 6, 2025
  The LawnMaster robotic lawnmower might run outside the designated working area due to several reasons. It could be that the barriers defining the area are incorrectly set, requiring you to check and improve them. Alternatively, the ultrasonic sensors might be turned off, so ensure they are activated. Finally, if the working area has slopes steeper than 35%, you should delimit those areas.

Summary

Robotic Lawnmower Symbols

Robotic Lawnmower Safety Information

Robotic Lawnmower In The Box

Robotic Lawnmower Assembly

Prepare the Mowing Area

Prepares the lawn surface and defines the mowing area for optimal robotic mower performance.

Define the Mowing Area

Outlines methods for clearly defining lawn edges using visual or physical boundaries for proper mower operation.

Install;Remove the Battery Pack

Provides instructions for safely installing and removing the battery pack from the robotic mower.

Robotic Lawnmower Operation

Control Panel Overview

Details the functions of the control panel buttons, indicators, and their meanings during operation.

Switching On;Off

Step-by-step guide on how to power the robotic mower on and off safely.

Starting;Stopping the Mower

Instructions for safely starting, stopping, and resuming the robotic mower's operation.

Cutting Modes

Explains the different mowing modes available, including Auto Cutting and Spot Cutting.

Setting the Cutting Height

Guide on how to adjust the cutting height for optimal lawn care.

Battery Pack Operation

Covers battery charging procedures, usage, and LED indicator meanings.

Charger Operation

Instructions for operating the battery charger and understanding its indicator lights.

Robotic Lawnmower Maintenance

General Maintenance

Routine cleaning and checks to keep the mower in safe working condition.

Replacing the Mower Blades

Detailed steps for safely replacing the mower's cutting blades.

Cleaning the Underside

Instructions for cleaning the underside of the robotic mower.

Storing the Mower

Guidelines for properly storing the mower when not in use.

Battery and Charger Maintenance

How to maintain the battery and charger for optimal performance and longevity.

Updating the Software

Instructions on how to update the robotic mower's software via USB.

Robotic Lawnmower Troubleshooting

Robotic Lawnmower Technical Data

Noise Emissions

Details the measured sound power and pressure levels of the robotic mower.

Robotic Lawnmower Recycling and Disposal

Grass Trimmer Symbols

Grass Trimmer Safety Information

Grass Trimmer In The Box

Grass Trimmer Assembly

Assembly Preparation

Instructions for preparing and unpacking the grass trimmer for assembly.

Assembling the Handle Shafts

Steps for securely connecting the upper, middle, and lower handle shafts.

Attaching the Auxiliary Handle

Guide on how to attach and adjust the auxiliary handle for comfortable use.

Fitting the Safety Guard

Instructions for correctly positioning and securing the safety guard.

Installing and Removing the Battery Pack

Steps for safely installing and removing the battery pack.

Grass Trimmer Operation

Battery Pack Operation

Details battery charging, LED indicators, and battery care.

Charger Operation

Instructions for using the charger and understanding its status lights.

Switching On and Off

Steps to safely switch the grass trimmer on and off.

Cutting Device - Advancing the Trimming Line

How to advance the trimming line and manage cutting performance.

Adjusting the Line Length Manually

Method for manually adjusting the trimming line length.

Safety Guard

Information about the safety guard and its importance during operation.

Auxiliary Handle

Details on adjusting the auxiliary handle for optimal working position.

Pivoting Head

How to adjust the trimmer head to different positions for various tasks.

Edging

Instructions for using the trimmer for edging tasks.

Plant Protector

How to use the plant protector to safeguard plants from the cutting line.

Trimming

Proper techniques and precautions for trimming grass effectively.

Grass Trimmer Maintenance

General Maintenance

Routine cleaning and care for the grass trimmer.

Storage

Guidelines for storing the grass trimmer and its accessories safely.

Battery and Charger Maintenance

How to maintain the battery and charger.

Spool Replacement

Instructions for replacing the trimmer line spool.

Line Replacement

Instructions for replacing the trimming line on the spool.

Grass Trimmer Troubleshooting

Grass Trimmer Technical Data

Grass Trimmer Recycling and Disposal

LawnMaster VBRM16 Specifications

General

Cutting Width	16 inches
Battery Voltage	40V
Deck Material	Plastic
Height Adjustment	6 positions
Type	Cordless

Related product manuals

LawnMaster VBRM16-01

70 pages

LawnMaster VBRM601YCM

LawnMaster VBRM16 - User Manual

Table of Contents

Other manuals for LawnMaster VBRM16

Questions and Answers

Summary

Robotic Lawnmower Symbols

Robotic Lawnmower Safety Information

Robotic Lawnmower In The Box

Robotic Lawnmower Assembly

Prepare the Mowing Area

Define the Mowing Area

Install;Remove the Battery Pack

Robotic Lawnmower Operation

Control Panel Overview

Switching On;Off

Starting;Stopping the Mower

Cutting Modes

Setting the Cutting Height

Battery Pack Operation

Charger Operation

Robotic Lawnmower Maintenance

General Maintenance

Replacing the Mower Blades

Cleaning the Underside

Storing the Mower

Battery and Charger Maintenance

Updating the Software

Robotic Lawnmower Troubleshooting

Robotic Lawnmower Technical Data

Noise Emissions

Robotic Lawnmower Recycling and Disposal

Grass Trimmer Symbols

Grass Trimmer Safety Information

Grass Trimmer In The Box

Grass Trimmer Assembly

Assembly Preparation

Assembling the Handle Shafts

Attaching the Auxiliary Handle

Fitting the Safety Guard

Installing and Removing the Battery Pack

Grass Trimmer Operation

Battery Pack Operation

Charger Operation

Switching On and Off

Cutting Device - Advancing the Trimming Line

Adjusting the Line Length Manually

Safety Guard

Auxiliary Handle

Pivoting Head

Edging

Plant Protector

Trimming

Grass Trimmer Maintenance

General Maintenance

Storage

Battery and Charger Maintenance

Spool Replacement

Line Replacement

Grass Trimmer Troubleshooting

Grass Trimmer Technical Data

Grass Trimmer Recycling and Disposal

LawnMaster VBRM16 Specifications

Related product manuals