Need help?Do you have a question about the LAWO V_pro8 and is the answer not in the manual?
General| Category | Media Converter |
|---|---|
| Video Standard | 3G/HD/SD-SDI |
| Form Factor | 1 RU |
| Sample Rate | 48 kHz |
| Bit Depth | 24-bit |
| Audio Channels | 384 channels |
| Video Processing | color correction |
| Audio Processing | Gain |
| Interfaces | SDI, MADI |
| Control | SNMP |
| Input Interfaces | SDI, MADI, AES |
| Output Interfaces | SDI, AES, MADI, Analog Audio |
| Power Supply | 100-240V AC, 50-60Hz |
| Dimensions | 483 x 44 x 400 mm |
Warning regarding excessive sound pressure levels and potential hearing damage.
List of critical notes to observe for safe operation and handling of the device.
Guidelines for qualified service personnel regarding internal component servicing and safety.
Information on handling defective parts and modules, emphasizing no user-serviceable parts.
Instructions for providing first aid in case of electric shock, including initial steps and seeking medical help.
Detailed description of the controls, connectors, and indicators located on the front panel of the V_pro8.
Detailed description of the connectors and ports located on the rear panel of the V_pro8.
Specifies the necessary hardware and software requirements for the computer used to control the V_pro8.
A step-by-step checklist to guide the user through the complete installation process of the V_pro8 system.
Details on proper grounding procedures and power connection requirements for the V_pro8 unit.
Steps and indicators for powering on the V_pro8, including status LEDs and system boot-up.
Instructions for establishing a network connection between a computer and the V_pro8 via LAN ports.
Guide to configuring TCP/IP settings for the V_pro8 and the control computer's network interface.
Instructions on how to access and use the V_pro8's web browser interface for system control.
Steps to diagnose and resolve issues preventing the web browser from connecting to the V_pro8.
Overview of front and rear panel connections for video, audio, and reference signals.
Configuration of video and audio reference signals for the V_pro8 system, including analog, SDI, and internal references.
Instructions on reassigning video and audio channels between inputs and outputs on a channel-by-channel basis.
Details on applying variable delay to SDI video, SDI audio, and MADI audio channels at input and output.
Overview of video and audio processing capabilities such as Frame Sync, Format Conversion, and Colour Correction.
Information displayed in the Status menu for SDI In, MADI ports, and the V_pro8 frame.
Menu for audio metering, input delay, frame sync, and sample rate conversion for selected SDI inputs.
Menu for audio metering and input delay adjustment for all MADI input channels.
Main menu for monitoring video, adjusting signal routing, and processing for SDI outputs.
Controls the four monitor outputs for Quad Split viewing on an external display connected to the MV (MultiView) OUT.
Management of the V_pro8's timing position and its video and audio reference signals.
To Next Page
