05. ProTuner - CS1, CS2RS Series
165
1. 소개 ....................................................................................................................................................... 165
2. 사용 조건 ............................................................................................................................................. 165
2.1 운영 체제 .................................................................................................................................................................. 165
2.2 모터 연결 .................................................................................................................................................................. 165
2.3 악세서리 .................................................................................................................................................................... 166
3. 소프트웨어 개요 .................................................................................................................................. 166
3.3 메뉴 및 툴바 ........................................................................................................................................................... 167
4. 드라이버 연결 ...................................................................................................................................... 169
5. 드라이버 파라미터 관리..................................................................................................................... 171
5.1 파라미터 읽기 ........................................................................................................................................................ 171
5.1.1. Filter Displayed Parameters ................................................................................................................ 171
5.2 파라미터 편집 ........................................................................................................................................................ 172
5.3 핵심 파라미터 설명 ............................................................................................................................................. 173
5.4 런 테스트 .................................................................................................................................................................. 178
5.5 상태 화면 모니터링 ............................................................................................................................................. 178
6. 파라미터 저장 ...................................................................................................................................... 180
7. 드라이버 리셋 ...................................................................................................................................... 181
8. 파라미터 설정 파일 관리 ................................................................................................................... 181
8.1 파라미터 설정 파일 열기 ................................................................................................................................. 181
8.2 파라미터 설정 파일 저장 ................................................................................................................................. 182
9. 드라이버 오류 이력 관리 ................................................................................................................... 183
1. 소개
Thank you for choosing Leadshine Products. The CS1-D series closed loop stepper drives include 4
models, CS1-D403, CS1-D507, CS1-D808, and CS1-D1008. When those drives are implemented with
compatible stepper motors with encoders, your motion control system performance will get
significant improvement over traditional open loop stepper systems such as no loss of step, higher
torque, lower noise & heating, and smoother motion. Leadshine closed loop Products are also ideal
alternatives to replace similar frame size brushless servo systems in low-to-middle speed
applications because of their features of much lower cost, much higher torque, and much easier
system setup and configuration.
For most applications Leadshine closed loop stepper systems are easy to configure & setup and
can be implemented without any tuning efforts, same as classic open loop stepper systems. But in
some cases this free “Leadshine Motion Studio” software tool can still be used for performance
tuning, and configuring custom settings like output current, micro-step resolution, control type, etc.
2. 사용 조건
Leadshine Motion Studio for CS1-D closed loop stepper drives is a free Windows based software.
To successfully run this software, the following Prerequisites must be satisfied.
2.1 운영 체제
This “Motion Studio” software must be installed and run on a computer with Windows 7 or Window
10 operating system for either 32 or 64bit.
2.2 모터 연결
From “Motion Studio” software settings of a CS1-D drive can be changed with or without a stepper
motor connected.
• Without a stepper motor connected, a user can only use the “Motion Studio” software to change
the CS1-D drive parameter values.
• With a stepper motor connected Properly to the CS1-D drive, a user can not only configure
settings of the connected drive but also run the motor to test and tune motion performance. Refer
to the CS1-D drive user manual for how to connect a stepper motor.
To Next Page
Loading...
