13
Charge the Parent Unit Battery
The Parent Unit runs on an internal rechargeable battery or AC power. To
continuously monitor your baby, keep the Parent Unit connected to AC power.
The Parent Unit turns on automatically after it connects to the power socket, and
its battery will charge at the same time.
Notes:
• Before using the baby monitor for the rst time, charge the Parent Unit battery for 12 hours.
When the Parent Unit battery is fully charged, the battery icon becomes solid .
• The standby time varies depending on your actual use.
The battery icon on the screen indicates the battery status (see the following
table).
Battery Indicators Battery Status Action
The screen displays .
The LED light ashes.
The battery power is very low
and may only be used for a used for a
short time.short time.
Charge without interruption
(about 30 minutes).
The battery icon becomes
solid .
The battery is fully charged. To keep the battery charged,
connect it to AC power when in
use.
To Next Page
Loading...
