LeapFrog LF2415 - Alert Tones

25
Turn on/o󰀨 Alert Tones
Low Battery Alert Tone
You can set the parent unit to beep when the parent unit operates in low battery
condition.
Switch it o󰀨 if you do not wish to be disturbed when the parent unit’s battery is
running low.
To turn on or o󰀨 low battery alert:
1� Press on the parent unit.
2� Press or to go to (Alert settings), then press .
3� Press or to highlight (Low battery alert), then press .
4� Press to toggle between
60min
AUTO
30min
15min
ON
OFF
ON
OFF
OFF
and
60min
AUTO
30min
15min
ON
OFF
ON
OFF
OFF
.
No Link Alert Tone
You can set the parent unit to beep when the link between the parent unit and the
Baby Unit is lost. If you are using only one Baby Unit with a parent unit, but paired
with two Baby Units, the No Link Alert Tone will activate until you have both paired
Baby Units linked to the parent unit. To continue using one Baby Unit, switch o󰀨
the No Link Alert Tone so you won’t be disturbed.
To turn on or o󰀨 lost link alert:
1� Press on the parent unit.
2� Press or to go to (Alert settings), then press .
3� Press or to highlight (Lost link alert), then press .
4� Press to toggle between
60min
AUTO
30min
15min
ON
OFF
ON
OFF
OFF
and
60min
AUTO
30min
15min
ON
OFF
ON
OFF
OFF
.