LeapFrog LF2415 - Set Screen off Timer

23
Set Screen o󰀨 Timer
You can set a specic time interval, if no keys have been pressed on the Parent
Unit, the screen will turn o󰀨 (goes to sleep) to save power. You can still hear
sounds from the Baby Unit when the screen turns o󰀨.
If you select Auto, the Parent Unit screen stays o󰀨 when the Baby Unit detects
no sound. Once the Baby Unit detects sounds that are louder than the selected
Sound Sensitivity Level, the Parent Unit screen turn on automatically. The
Parent Unit will then turn o󰀨 again after no sound has been detected for a while.
1. Press to enter the main menu.
2. Press or to go to (Screen o󰀨 timer), then press .
3. Press or to select a screen o󰀨 time
60min
45min
30min
15min
OFF
60min
45min
30min
15min
OFF
5min
, or select
60min
45min
30min
15min
OFF
to
always remain on, then press to conrm.
4. If you select
60min
AUTO
30min
15min
ON
OFF
ON
OFF
OFF
, press , then press or to adjust the Sound
Sensitivity Level. Press to conrm.
Note:
• If you have muted the Parent Unit speaker, only the Parent Unit screen will turn on when a sound is
detected.