28
Night Vision
The Baby Unit has infrared LEDs that allow you to see your baby clearly at night
or in a dark room. When the Baby Unit being viewed detects low light levels, the
infrared LEDs are switched on automatically. The images from the Baby Unit are
in black and white, and appears on the screen.
Notes:
• It is normal to see a short white glare on your Parent Unit screen as the Baby Unit adapts to
the dark environment.
• When the infrared LEDs are on, the images are in black and white. This is normal.
Tip:
Depending on the surroundings and other interfering factors, for example, lighting, objects,
colours and backgrounds, the image quality may vary. Adjust the Baby Unit angle or place the
Baby Unit at a higher location to prevent glare and a blurred display.
Dim Mode
Dim Mode automatically activates to helps you save parent unit power and cannot
be turned o.
The parent unit display will dim to conserve energy after 10 minutes of inactivity
when no keys are pressed or alerts are received from the Baby Unit.
10 mins inactive
Press any button
To Next Page
Loading...
