LeapFrog LF2415 - Adult Supervision and Safety

33
General Product Care
To keep this product working well and looking good, follow these guidelines:
• Avoid placing it near heating appliances and devices that generate electrical noise (for
example, motors or uorescent lamps).
• DO NOT expose it to direct sunlight or moisture.
• Avoid dropping the product or treating it roughly.
• Clean with a soft damp cloth.
• DO NOT immerse the Parent Unit and the Baby Unit in water and do not clean them under
running water.
• DO NOT use cleaning spray or liquid cleaners.
• Make sure the Parent Unit and the Baby Unit are dry before you connect them to the mains
again.
Storage
When you are not going to use the baby monitor for some time, store the Parent Unit, the Baby
Unit and the adaptors in a cool, dry place.
Adult Supervision
• This baby monitor should be used as an aid and proper adult supervision is required.
• Do not place the Baby Unit inside the crib or playpen.
• As for children’s safety, touch or play with the baby monitor and all the accessories are not
allowed. THIS IS NOT A TOY.
Technical Specications
Frequency Control Crystal controlled PLL synthesizer
Channels 32
Frequency Baby Unit: 2405 - 2475 MHz
Parent Unit: 2405 - 2475 MHz
LCD 5” Colour LCD (WQVGA 480x272 pixel)
Power requirements Parent Unit: 3.6V, 2600mAh Li-ion, 9.36Wh Li-ion battery
Baby Unit power adaptor: Output: 5V DC @ 600mA
Parent Unit power adaptor: Output: 5V DC @ 1A
Maximum power used by the
transmitter
0.1 W (100 mW)