LeapFrog LF2415 - Night Light Control

22
Night Light
You can control the night light remotely on the Parent Unit or directly on the Baby
Unit.
On the Baby Unit
Slide the
Night Light Control Key
located at the back of the Baby Unit to
turn on/o󰀨 the night light.
On the Parent Unit
1�
Press to enter the main menu when the Parent Unit is idle.
2�
Press or to go to (
Night Light
) menu.
To turn on/o󰀨 the night light:
• Press to toggle between
60min
AUTO
30min
15min
ON
OFF
ON
OFF
OFF
or
60min
AUTO
30min
15min
ON
OFF
ON
OFF
OFF
.
To change the night light colour:
• Press
or
to scroll to
60min
AUTO
30min
15min
ON
OFF
ON
OFF
OFF
(Night Light Colour)
, press . Then, press
or
to
select one of the seven colours
, or you can select
60min
AUTO
30min
15min
ON
OFF
ON
OFF
OFF
to change to all
seven colours in cycle. Press to conrm your selection.
To set the night light timer:
• Press
or
to scroll to
60min
AUTO
30min
15min
ON
OFF
ON
OFF
OFF
(Timer), press . Then, press
or
to set
timer
60min
45min
30min
15min
OFF
60min
45min
30min
15min
OFF
60min
45min
30min
15min
OFF
to turn the night light o󰀨. Or select
60min
45min
30min
15min
OFF
to keep the night
light on
, and press to conrm your setting.
• Set timer to
60min
AUTO
30min
15min
ON
OFF
ON
OFF
OFF
to turn on the night light when Baby Unit detects sound. It will
turn o󰀨 after 15 minutes of no sound detection. You can set Sound sensitivity
level to detect sound that exceeds setting level. See
Adjust Sound Sensitivity
Level on page 24.
To turn on/o󰀨 the Adaptive night light:
• Press
or
to scroll to
60min
AUTO
30min
15min
ON
OFF
ON
OFF
OFF
, press . Turn on/o󰀨 the
Adaptive night light
feature. When this feature is on, the Baby Unit detects the Adaptive night light.
If the room is bright, the night light adjusts itself to be brighter; if the room is
dim, the night light adjusts itself to be dimmer.