LeapFrog LF2415 - Adjust Sound Sensitivity Level

24
Adjust Sound Sensitivity Level
You can choose to hear sounds from the Baby Unit continuously, or to only hear
sounds that exceed a set sensitivity level.
When the Baby Unit detects sounds that exceed the set sensitivity level, the Parent
Unit screen turns on if it has been switched off, and the Baby Unit transmits the
detected sounds to the Parent Unit. You will immediately be able to see and hear
your baby.
The night light will also turn on if you set the
Night Light Timer
to
Auto
.
Adjust the microphone sensitivity of your Baby Unit, the higher the sensitivity level,
the more sensitive the Baby Unit is in detecting sounds to be transmitted to the
parent unit.
To adjust sound sensitivity level:
1� Follow the steps in Adjust Screen o󰀨 Timer to set the Screen o󰀨 timer to
AUTO.
2� Press or to increase or decrease the sensitivity level.
Sound
Sensitivity
Level
Level 5
(Highest)
Level 4
(High)
Level 3
(Medium)
Level 2
(Low)
Level 1
(Lowest)
Description (Default setting)
The parent
unit screen
turns on for
quiet sounds,
(including
background
noises) from
your baby’s
room.
The Parent
Unit screen
turns on for
soft babbling
and louder
sounds
from your
baby. The
Parent Unit
remains quiet
when your
baby sleeps
soundly.
The Parent
Unit screen
turns on for
loud babbling
and louder
sounds from
your baby. The
Parent Unit
remains quiet
when your
baby makes
soft sounds.
The Parent
Unit screen
turns on for
crying and
louder sounds
from your
baby. The
Parent Unit
remains quiet
when your
baby makes
soft sounds.
The Parent
Unit screen
turns on for
loud crying or
screeching
sounds from
your baby.
The Parent
Unit remains
quiet when
your baby
makes soft
sounds.