LeapFrog LF2415 - Temperature Monitoring; Temperature Alerts; Temperature Range Settings

27
Temperature
Temperature Alert
Your Baby Unit can help you keep track of your baby’s room temperature in order
to ensure that your baby stays in the comfort zone at all times.
With temperature sensor, the relevant data will be shown on the status bar
when you powered on your units. If the detected temperature is out of the preset
temperature range, the Parent Unit beeps.
Turn on/o the Temperature Alert
1�
Press
when the Parent Unit is idle
.
2� Press or to go to (Temperature).
3� Press or to select (Temperature alert), then press .
4� Press or to select
60min
AUTO
30min
15min
ON
OFF
ON
OFF
OFF
or
60min
AUTO
30min
15min
ON
OFF
ON
OFF
OFF
, then press to turn on or o󰀨 temperature
alert.
Set the Temperature Range
You can set the desired room temperature alert range. The minimum temperature
can be set between 50
o
F (10
o
C) and 76
o
F (24
o
C). The maximum temperature can
be set between 77
o
F (25
o
C) and 102
o
F (39
o
C).
1�
Press when the Parent Unit is idle.
2� Press or to go to (Temperature).
3� Press or to select (Maximum Temperature) or (Minimum
Temperature), press .
5� Press or
to set the maximum or minimum temperature
, and then press
to conrm.
Set Temperature Format
You can choose to display the temperature in Fahrenheit (
o
F) or Celsius (
o
C)
1�
Press when the Parent Unit is idle.
2� Press or to go to (Temperature).
3� Press or to select , then press .
4� Press or to select
o
C or
o
F, press to conrm.