System Commands 5
WAVEFORM TRANSFER
DESCRIPTION
COMMAND SYNTAX
EXAMPLE (GPIB)
RELATED COMMANDS
STORE, STO
Command
The STORE command stores the contents of the specified trace
into one of the internal function memories Memory C,
Memory D, Function E~, Function F~:, or to the memory card.*
<memory>:STOre <trace> [,’<filename>’ ]*
<memory> := {MC, MD, FE~:, FF~, CARD*}
<trace> := {EA, EB, MC, MD, FE, FF, C1, C2, C3:[:, C4:1:}
<filename> := a string of up to 8 characters.
Notes applying to oscilloscopes equipped with the memory card
option:
1. Any extension supplied with the filename is ignored.
2. If no filename (or an empty string) is supplied, the oscilloscope
generates a filename according to its internal rules.
3. If the CARD:STORE command is sent without any argument,
all traces currently enabled in the Store Setup will be stored on
the card. This setup can be modified using the STORE_SETUP
command.
The following command stores the contents of Expand B (EB) into
Memory D (MD).
CMD$="MD:STO EB": CALL IBWRT(SCOPE%,CMD$)
The following command stores C1 on the memory card in a file
called "DIODE".*
CMD$="CARD:STO CI,’DIODE’":
CALL IBWRT(SCOPE%,CMD$)
FUNCTION_STATE:I:, STORE_SETUP*, RECALL
:l: 4-channel oscilloscopes only
* only oscilloscopes equipped with the memory card option
139
To Next Page
Loading...
