Need help?Do you have a question about the LeCroy WAVESURFER and is the answer not in the manual?
General| Input Coupling | AC, DC, GND |
|---|---|
| Interface | USB, LAN, GPIB (optional) |
| Channels | 4 |
| Display | 10.4" LCD |
| Vertical Resolution | 8 bits |
| Input Impedance | 1 MΩ || 50 Ω |
| Max Input Voltage | 400 Vpk (1 MΩ) |
| Trigger Modes | Edge, Pattern |
| Bandwidth | 200 MHz to 1 GHz |
Accessing help specific to instrument controls and features via dedicated buttons or menus.
Accessing help for the underlying Windows operating system features by minimizing the scope application.
Details warranty terms, conditions, and service procedures.
Specifications for vertical signal acquisition.
Specifications for horizontal timebase.
Specifications for trigger functionality.
Instructions for physical setup and connections.
Details the ProBus probe connection system.
Explanation of single-shot acquisition.
How to adjust vertical gain and offset.
Options for signal coupling (AC, DC, GND).
How to configure timebase settings.
Covers basic edge triggering.
Details advanced trigger types like Glitch and Width.
Configuring grid, intensity, and line styles.
Using persistence to view waveform history.
Procedures for saving/loading instrument setups.
Setting up and performing print operations.
Using cursors for precise measurements.
Explains various waveform parameters and their calculation.
Overview of applying mathematical operations to waveforms.
Details the Fast Fourier Transform analysis.
Accessing system status and configuration.
Setting up network communication for remote control.
Customizing instrument behavior and settings.
To Next Page