Specifications 3-5
3.17 Auxiliary Input
Signal Types Selected from External Trigger or External Clock input on front panel
Coupling 50 Ω: DC, 1MΩ: AC, DC, GND
Maximum Input Voltage 50 Ω: 5Vrms, 1MΩ: 250 Vmax (Peak AC; ≤ 10 Khz + DC)
3.18 Auxiliary Output
Signal Types Trigger Enabled, Trigger Output, Pass/Fail, or Off
Output Level TTL, ~3.3 V
Connector Types BNC, located on rear panel
3.19 General
Auto Calibration
Ensures specified DC and timing accuracy is maintained for 1 year
minimum
Power
100-240 Vrms (±10%) at 50/60 Hz; 100-120 Vrms (±10%) at 400 Hz
Automatic AC Voltage Selection
Installation Category: 300V CAT II; Max. Power Consumption: 425
VA/425 W
3.20 Environmental
Temperature: Operating +5°C to 40°C
Temperature: Non-Operating -20°C to +60°C
Humidity: Operating
5% to 80% RH (non-condensing) up to 30°C, Upper limit derates
linearly to 50% RH (non-condensing) at 40°C
Humidity: Non-Operating 5% to 95% RH (non-condensing) as tested per MIL-PRF-28800F
Altitude: Operating 3,048m (10,000 ft) max at ≤ 25°C
Altitude: Non-Operating 12,190m (40,000 ft)
3.21 Physical Dimensions
Dimensions (HWD) 211mm x 355mm x 363mm (excluding feet) 8.3" x 13.8" x 14.3"
Net Weight 10 kg (22 lb), excluding printer
Shipping Weight less than 13.6 kg (30 lb)
3.22 Certifications
CE Approved, UL and cUL listed; Conforms to EN 61326-1, EN 61010-
1, UL 3111-1, and CSA C22.2 No. 1010.1
3.23 Warranty and Service
3-year warranty; calibration recommended annually. Optional service
programs include extended warranty, upgrades, calibration, and
customization services
To Next Page
Loading...
