LeCroy Waverunner2 LT372 Series User Manual

Rev. D Performance Verification 5-9
5.5.2 External Trigger Leakage Current
a. DC 50
Ω
ΩΩ
Ω
!
Recall
xxxP011.PNL
or configure the DSO as shown in 5.5.1
and make the following changes :
Select Setup trigger
Set Trigger on :
EXT
External :
DC 50
Ω
ΩΩ
Ω
!
Connect the DMM to External.
!
Measure the
voltage
and enter it in Table 3. Compare it to the limits.

LeCroy Waverunner2 LT372 Series Specifications

General

Brand	LeCroy
Model	Waverunner2 LT372 Series
Category	Test Equipment
Language	English