LEGRAND UPS - Alarm and Status Display Mode; Alarms and Statuses Description

UPS user manual
Manuel de l’utilisateur de l’ASI
Utilizzo dell’UPS
OMG38225 REV.B
31
STATUSES
S1
BOOSTER OK
S12
BATT STANDBY
S2
BATTERY OK
S13
BATT CHARGING
S3
INVERTER OK
S14
BATT FLOATING
S4
INVERTER --> LOAD
S5
INV BYPASS SYNC
S6
BYPASS OK
S7
BYPASS --> LOAD
S9
INV MASTER SYNC
Display and recording mode of alarms
 The statuses are always displayed in ascending order when the ALARMS –
STATUSES menu is entered.
 The alarms are shown when they are present and must be silenced with the
buzzer.
 The alarms remain displayed whilst they are present and they are automatically
stored in the event log with date and time.
Description of alarms and statuses
For a more detailed description of the alarms and statuses, see the “Faults and
alarms” section of the present manual.