WARNING
Improperly repaired equipment
Risk of injuries to users and equipment destruction due to lack of repair
knowledge.
Precautions:
▶
Only authorised Leica Geosystems Service Centres are entitled to repair
these products.
For the AC/DC power supply:
WARNING
Unauthorised opening of the product
Either of the following actions may cause you to receive an electric shock:
•
Touching live components
•
Using the product after incorrect attempts were made to carry out repairs.
Precautions:
▶
Do not open the product!
▶
Only Leica Geosystems authorised service centres are entitled to repair
these products.
For the AC/DC power supply:
WARNING
Electric shock due to use under wet and severe conditions
If unit becomes wet it may cause you to receive an electric shock.
Precautions:
▶
If the product becomes humid, it must not be used!
▶
Use the product only in dry environments, for example in buildings or
vehicles.
▶
Protect the product against humidity.
1.6 Laser Classication
1.6.1 General
The following chapters provide instructions and training information about
laser safety according to international standard IEC 60825-1 (2014-05) and
technical report IEC TR 60825-14 (2004-02). The information enables the per-
son responsible for the product and the person who actually uses the equip-
ment, to anticipate and avoid operational hazards.
☞
According to IEC TR 60825-14 (2004-02), products classied as laser
class 1, class 2 and class 3R do not require:
•
laser safety ofcer involvement,
•
protective clothes and eyewear,
•
special warning signs in the laser working area
if used and operated as dened in this User Manual due to the low
eye hazard level.
General
10 Safety Directions
To Next Page
Loading...
Need help?
General
