Leica BLK2GO - Electrical Data; Environmental Specifications

Scanning laser Value
Wavelength 830 nm (invisible)
7.4 Electrical Data
Internal battery
7.2 V DC; one internal battery provided with the instrument.
Internal battery Value
Operating time > 40-45 minutes operating, continuous use
at room temperature.
Charging time Typical charging time with GKL821 charger is
2.5 hours at room temperature.
7.5 Environmental Specications
Type Operating temperature
[°C]
Storage temperature
[°C]
Instrument +5 to +40 −25 to +70
Battery 0 to +50 −40 to +70
Charger and AC/DC
power supply
0 to +40 −40 to +70
Type Protection against water, dust and sand
Instrument IP54 (IEC 60529)
Dust protected
Betamesh BM90 – ltration level 69 µm
Betamesh BM20 – ltration level 20 µm
Protection against splashing water from any direction.
Battery IP54 (IEC 60529)
Dust protected
Protection against splashing water from any direction.
Charger and AC/DC
power supply
IPX0 (IEC 60529)
Only operate in dry environments, for example in
buildings and vehicles.
Type Humidity
Instrument max. 95% non-condensing
Battery and Charger max. 95% non-condensing
AC/DC power supply max. 80% non-condensing
Type Limits of use
Instrument and
battery
Indoor and outdoor use.
Working altitude: unlimited
Charger and AC/DC
power supply
Indoor use only.
Working altitude: ≤ 2000 m
BLK2GO power supply
Battery operating and
charging times
Environmental
specications
38 Technical Data