26 Leica DFC Cameras – Image Acquisition Guide
select
Configuration…
and choose a camera from
the Camera Configuration panel and click OK.
Leica DFC cameras are identified by their model name
and unique serial number, so there is no restriction on
connecting several cameras at the same time.
Sensor
(IC 3D camera only)
The IC 3D can select one of the two sensors in
Sensor
.
This item is only visible when using the IC 3D camera.
The default is the left sensor,
L
..
Select
L
for the left sensor and
R
for the right
Managing Configurations
Saving and deleting
configurations
Once you have defined the best camera settings for
your environment, you can save and retrieve them at
any time. This feature is not only useful for different
working and lighting conditions, but also creates
reproducible user-specific working settings.
To save the current camera settings, right-click
Configuration
and select the
Save / Delete…
.
Give a name to the current settings and save.
To Next Page
Loading...
Need help?
General
