108 / Displays
2.1.18 Shutter speed
(appears immediately with manual setting, i.e. with expo-
sure modes
T/M, after tapping the shutter release button
with automatic setting, i.e. with exposure modes
P/A, red
after pressing the shutter release button to the pressure
point when the setting range is exceeded with exposure
modes
P/T/A, otherwise white)
2.1.19 Indication for setting the slowest shutter
speeds with the central setting dial
(only when setting the shutter speed dial to the
position
2+
)
2.1.20 Aperture value
(appears immediately with manual setting, i.e. with expo-
sure modes
A/M, after tapping the shutter release button
with automatic setting, i.e. with exposure modes
P/T, red
after pressing the shutter release button to pressure point
when the setting range is exceeded with exposure modes
P/T/A, otherwise white)
2.1.21 Indication of program shift option
(appears only with exposure mode P)
2.1.22 Indication of shifted pair of values
(appears only with exposure mode P and after shifting)
2.1.23 Exposure compensation set, including
compensation value
(not with exposure mode M and video recording)
alternatively to 2.1.18–2.1.23:
2.1.24 Time and date
(appears only briefly after turning on the camera and/or
after setting the data)
2.1.25 Light balance
(appears only with exposure mode M)
2.1.26 Automatic exposure bracketing activated
(crossed out and flashing in red when shutter release but-
ton is pressed to pressure point with flash unit attached,
or switched on and activated [function combination not
possible], otherwise white, not with video recording)
2.1.27 Exposure metering method
a
2
Center-weighted exposure metering
b
3
Multi-field metering
c
4
Spot metering
2.1.28 Synchronization to the end of the exposure
(not in conjunction with flash modes with
pre-flash 2.1.2 b/d/f)
2.1.29 Indication that spot exposure metering is
switched on
2.1.30 Spot autofocus metering field
(not with video recording)
2.1.31 Normal autofocus metering field
(not with video recording)
alternatively to 2.1.29–2.1.31:
2.1.32
A
Self-timer switched on/running
(flashing in blue during delay, otherwise white)
a
Ä
2 seconds delay
b
Z
10 seconds delay
alternatively to 2.1.29–2.1.31:
2.1.33
y
Sound recording in progress
(appears only during recording, microphone flashes in
blue, triangles alternate from black to red in a
1 s-rhythm)
To Next Page
Loading...
Need help?
General
