Leica DMi8 User Manual

3
DO NOT TOUCH ANY BUTTON/SWITCH UNLESS IT IS SPECIFIED BELOW
Start-up
1) Turn on the power strip, It is located on the wall above the power bench.
2) Wait until the display screen at the front of the microscope stand finishes startup
3) If Computer is not ON, turn on the computer.
4) Log in to your lab account on the computer:
Login to the computer using the lab account and password you were given during your training.
Remember to log off when you are finished with your session.
5) Next, open the software “LAS X”

Leica DMi8 Specifications

General

Type	Inverted Microscope
Software	Leica Application Suite X (LAS X)
Dimensions	Varies depending on configuration
Weight	Varies depending on configuration
Imaging Modes	Brightfield, Phase Contrast, DIC, Fluorescence
Objective Compatibility	Leica Objectives (various threads depending on nosepiece)
Stage	Motorized XY stage
Camera Compatibility	Leica cameras and 3rd party cameras via C-mount or direct camera ports
Illumination	LED illumination
Focusing	Motorized Z-drive
Nosepiece	Motorized 6-position nosepiece
Automation	Fully automated
Optical System	Infinity Optical System
Magnification Range	Varies depending on objective used
Observation Tubes	Various ergonomic observation tubes available (binocular, trinocular)
Filter Slots	Multiple filter cube slots
Camera Port	C-mount
Software Compatibility	Compatible with Leica LAS X software