Leica IP C - Page 58

58
Version 2.0, Revision I
Operation
5
3. First, the page settings must be selected: Click on File > Page Setup to open the Page Setup
dialog box (→ "Fig. 46").
4. In Margins (→ "Fig. 46-1"), set all margins to 0; the print range will change as shown
(→ "Fig. 46-5").
5. In Orientation, select Portrait (→ "Fig. 46-2").
6. Once the printer has been set up as described above, a cassette format will automatically be
shown in the Size (→ "Fig. 46-3") input field in the Paper dialog box. You can choose between
two cassette formats "cassette 35 °" and "cassette 45 °".
7. In the Source (→ "Fig. 46-4") input field you can select the magazine(s) which will supply the
cassettes to be imprinted.
8. Deactivate Print Page Numbers (→ "Fig. 46-6").
1
2
3
4
5
Fig. 46
6
Warning
The cassette type (angle 35 ° or 45 °) selected in PAPER > SIZE and the cassette type actually used
must match. Otherwise, the print head can be damaged.
Selectable options in the Paper > Source dialog box
When clicking on the Source input field, an alphabetical list of all cassette supply options from all
6 magazines opens up.
• Manual feed (→ "Fig. 47-1") means that individual cassettes will be placed onto the chute
(→ "Fig. 3-6") and imprinted. The printer will not start printing until the sensor (→ "Fig. 3-7") reacts
(→ p. 55 – 5.2 Display indications).
• Further options are magazines 1 through 6. If a particular magazine has been selected as supply
source, printing will stop once that magazine is empty.