Leica IP C - 4.7 Filling and inserting the magazines

35
Leica IP C
Instrument Setup 4
1
2
Fig. 23
4. The contact spring (→ "Fig. 24-1") has to touch the ignition wire (→ "Fig. 24-2") of the bulb after
being inserted.
1
2
Fig. 24
5. Swing the reflector downwards. Reinsert and retighten screw (→ "Fig. 17-3").
6. Close lid (→ "Fig. 15-6") of the instrument again.
4.7 Filling and inserting the magazines
Inserting the strips
Depending on the type of cassette used, additional inserts must be placed into the magazine
(→ "Fig. 25-3") to guide the cassettes properly:
This includes:
Metal insert (→ "Fig. 25-2")
Adhesive strip (2 mm thick) (→ "Fig. 25-1")