80
Version 2.0, Revision I
Troubleshooting
7
Replacing the fuses
1. Insert a screwdriver (→ "Fig. 66-2") into the slot in fuse holder (→ "Fig. 66-1"); push slightly
inwards and at the same time rotate the screwdriver a 1/4 turn to the left.
1
2
Fig. 66
2. The fuse holder is released and can be removed.
3. Remove the defective fuse (→ "Fig. 67-2") from the fuse holder (→ "Fig. 67-1") and insert the
correct type replacement fuse.
1
2
Fig. 67
4. Insert the fuse holder with the replacement fuse. Push the holder in with the screwdriver and
secure it with a 1/4 turn to the right.
To Next Page
Loading...
